ETMY ET-C550 poc mobile radio

ET-C550
The ETMY ET-C550 integrates a 10W analog UHF two-way radio with a global LTE PoC platform into a single, compact mobile terminal. It is ideally suited for fleet deployment in sectors such as logistics, security, transportation, and emergency services.
Description:
POC Global
Telcom
Quantity:
Contact Now
add to cart
Buy Now

ETMY ET-C550 vhf uhf mobile radio,private mobile radio,poc mobile radio


 

Main features

Dual-Mode Architecture: Analog Today, PoC Tomorrow

The ET-C550 is fundamentally a hybrid device. Its dual-mode hot-key allows drivers to switch instantly between 10 W UHF analog simplex and 4G PoC operation with a long-press of the PTT side key. An LED bar provides clear mode indication: orange for analog, blue for PoC. This design lets security fleets maintain existing campus repeaters while extending coverage nationwide the moment vehicles leave the gate. For integrators, this means we can quote the ET-C550 as a true poc mobile radio upgrade path rather than a disruptive forklift replacement.

Global LTE Bands with Dual-SIM Resilience

The PoC module supports LTE-FDD B1/B3/B5/B8 and TDD B38/B39/B40/B41, covering Europe, Middle-East, Africa, and LATAM from a single SKU. Dual-SIM architecture provides carrier redundancy: if SIM-A drops to 3G or loses signal entirely, SIM-B takes over in 180 ms. For cross-border logistics operators, this eliminates the"sorry, no coverage"objection that too often kills PoC deals. As a poc mobile radio platform, the ET-C550 gives fleet managers confidence that their drivers remain reachable regardless of which country or network they traverse.

High-Power Analog Section for Legacy Compatibility

The analog transceiver delivers 10 W output on 400-470 MHz UHF, achieving up to 10 km line-of-sight to legacy repeaters. This is not a toy VOIP handset with a toy RF stage—it is a genuine vhf uhf mobile radio that satisfies regulatory power requirements and interoperates with existing analog fleets. Sixteen programmable channels with 2.5–50 kHz step frequency and CTCSS/DCS squelch ensure compatibility with virtually any legacy infrastructure. For integrators, this means we can phase PoC adoption by department or by vehicle without stranding existing repeater investments.

Loud, Clear Audio for Noisy Mobile Environments

Vehicle cabins are acoustically hostile. The ET-C550 addresses this with a 2 W class-D amplifier and DSP-based intelligent noise reduction, delivering 106 dB SPL at 1 meter. Drivers hear calls clearly over engine rumble, highway wind noise, and HVAC systems. The hand microphone includes active noise suppression, ensuring that transmitted audio is equally intelligible. One ET-C550 replaces separate mobile and PoC hardware, cutting installation labor, cable complexity, and dashboard clutter while still allowing fleet managers to brand the solution as a network mobile radio upgrade.

Integrated GPS for Fleet Management

An internal GPS receiver feeds location data to the PoC platform every 30 seconds—no external antenna, no serial cable, no additional installation cost. Dispatchers see live AVL on the same screen as voice communications, enabling ETA compliance verification for courier contracts and response-time documentation for ambulance services. For private mobile radio operators adding PoC to their portfolio, this built-in telematics capability creates new recurring-revenue opportunities without additional hardware.
 

Other Functions

  • Dual modes work: analog and 4G LTE
  • GPS Accurate Navigation and Position
  • 2.8 inch HD color screen
  • Support phone calling

Specifications

ParameterValue
Radio Size138 × 63 × 59 mm
Radio Weight354 g
Hand Microphone Size92 × 62 × 46 mm
Hand Microphone Weight170 g
PoC ParameterGPS; GPS/AGPS; USB Type-C
SIM Card TypeDual SIM, single standby
PlatformPOG Global
Network modeLTE TDD / LTE FDD
Network frequency bandsLTE FDD: B1, B3, B5, B8; LTE TDD: B38, B39, B40, B41
CPUMDM 9X07
OSLINUX
RAM1 GB (32 Mb × 32) DDR2
Storage2 GB (256 Mb × 8) NAND
Analog Parameter
Frequency range400–470 MHz
Working VoltageDC 12–36 V
Channel16
Step frequency2.5 kHz – 50 kHz
Frequency stability±2.5 PPM
Antenna impedance50 Ω
Operating ModeF2D / F3E
Speaker2 W
Transmit Part
Output power10 W
Current≤ 2.5 A
Modulation distortion≤ 5 %
Maximum frequency deviation≤ 5 kHz / ≤ 2.5 kHz
CTCSS/DCS Frequency Offset0.5 kHz + 50 Hz
Stray radiation≤ 7 μW
Modulation Type16KpF3E / 11KφF3E
Spurious Emission≤ -36 dBm
Receive Part
Reference sensitivity≤ -120 dBm (12 dB SINAD)
Squelch Sensitivity≤ -120 dBm
Audio power≥ 1.0 W / 80 Ω
Audio distortion< 10 %
Modulation receiving bandwidth> 85 dB
Spurious response suppression≥ 65 dB
Intermodulation≥ 60 dB

FAQ

Q1: Can your radios be customized with my brand?

A: Of course. Generally, logos, outer packaging, patterns, etc. can be customized. The minimum order quantity is usually 200 pieces.

Q2: Can you offer the sample for me to test the quality first?

A: Yes,we can offer the sample, but sample cost and shipping cost need to pay by yourself, the fee will return to you when place order quality.

Q3: Do you have radio agent certificate?

A: Yes,we are, Icom, Hytera, Baofeng,Vertex these radio authorized agent,all of these certificates we have and can offer to you.

Q4: What is your radios warranty?

A: Radio body:1 year, accessories:6 months

Q5: What is your lead time for the radio?

A: 2-3 days for order prepare after we get payment. Add 5-6 days for Express transportation.

SEND MESSAGE

We will contact you within one working day. Please pay attention to your email.