0

    Kenwood TKR-D810 repeater

    Kenwood TKR-D810
    This DMR digital repeater with 40W power is ideal for long-range communications in various scenarios.
    minimum order: 
    1 set
    Supply Ability: 
    100.0set / Month
    Country of Origin: 
    GuangZhou
    Quantity:
    Contact Now
    add to cart
    Buy Now

    Kenwood TKD-810 DMR 40w kenwood base radio digital uhf repeater

     
     
    Kenwood TKR-D810 radio repeater is an excellent repeater, suitable for DMR kenwood base radio digital repeater, UHF repeater and two-way radio repeater, etc., widely used for its excellent performance favored by users.

    Kenwood TKR-D810 radio repeater has excellent performance with 40W power. The equipment uses high-quality technology and materials to ensure its reliable operation in a wide range of radio communication situations. It is widely used in commercial occasions and public utilities, especially in large buildings and in mountainous areas, city centers, and deep tunnels, with wide signal coverage, stable performance, and long service life.

    The Kenwood TKR-D810 radio repeater supports the DMR digital standard, and its design and cost optimization provide the highest quality audio performance. Moreover, the repeater supports multiple transmission modes, can adapt to different user needs, different occasions, and meet different business requirements.
    Kenwood TKR-D810 radio repeater also has excellent security functions, supports digital encryption, authority management and many other functions, which can ensure the security and privacy of user communication.

    The Kenwood TKR-D810 radio repeater is easy to use. Its user interface is simple and easy to understand, which helps users get started quickly. In addition, the repeater can be configured and monitored using a network connection, allowing users to fully manage it.
     

    Features

    • Programmable auxiliary input/output
    • Transmit power drop detection
    • Programmable button DTMF on the front panel Control (valid only in simulation mode)
    • DTMF auxiliary output control (Only available in simulation mode)
    • DTMF auxiliary input monitoring(Only available in simulation mode)
    • Built-in transfer control
    • Built-in single color code transfer control
    • Dynamic QT and DQT, up to 16 QT and DQT can be pre-stored
    • Hook timer
    • Flash memory, support software upgrade
     
     

    Specification

    GENERAL
    Frequency Range   
    Type 1
    Type 2
    		450-520 MHz
    400-470 MHz
    Channel Spacing    Analog
    Digital    		25/12.5 kHz
    12.5 kHz
    Current Drain        standby
    Receive
    Transmit    		0.5A
    1.0A
    11.0A
    TX Power         
    50 %Duty
    100 % Duty
    		40 w
    25 w
    Frequency Stability±1.0 ppm
    Operating Voltage13.6VDC±15 %
    Operating Temperature Range-22°Fto +140°F(-30° C to +60°c)
    Antenna lmpedance50Q
    Dimensions         Projections not
    (Wx HxD)        included    		19x3-1/2x 13-1/3 in
    (483 x 88 x 340 mm)
    Weight (net)21.4 lbs (9.7 kg)
    FCC ID               Type 1
    Type 2    		K44422300K44452500
    K44452501
    ic Certification      Type 1
    Type 2    		282F-422300282F-452501
    RECEIVER
    Sensitivity (Digital)    3% BER
    (12.5kHz)             1%BER    		0.28 pV
    -4 dB uV(0.32 pV)
    Sensitivity
    12 dB SINAD
    (Analog)    		0.28uV
    Adjacent Channel Selectivity (Analog)"1
    (25 kHz/12.5 kHz)    		83 dB/77 dB80 dB /74 dB
    FM Hum &Noise
    25kHz/12.5kHz
    (Analog)    		55 dB /50 dB
    lntermodulation80 dB
    Spurious Response Rejection90 dB
    Audio Distortion (Ext.Speaker)Less than 2.5 % at 1000 Hz
    Audio Output(Ext.Speaker)4 w(at 4 , less than 5 % distortion)
    TRANSMITTER
    RF Power Output50-5w40-5 w
    Modulation Limiting25 kHz1 12.5 kHz
    (Analog)    		±5.0 kHz/±2.5 kHz
    Spurious Emission80 dB
    FM Noise(ElA)
    25 kHz/12.5 kHz
    (Analog)    		55 dB/50 dB
    Modulation DistortionLess than 1 % at 10O0 Hz
    Modulation16KOF3E,11KOF3E,7K60FXD,7K6OFXE

    FAQ

    Q1: Can your radios be customized with my brand?

    A: Of course. Generally, logos, outer packaging, patterns, etc. can be customized. The minimum order quantity is usually 200 pieces.

    Q2: Can you offer the sample for me to test the quality first?

    A: Yes,we can offer the sample, but sample cost and shipping cost need to pay by yourself, the fee will return to you when place order quality.

    Q3: Do you have radio agent certificate?

    A: Yes,we are, Icom, Hytera, Baofeng,Vertex these radio authorized agent,all of these certificates we have and can offer to you.

    Q4: What is your radios warranty?

    A: Radio body:1 year, accessories:6 months

    Q5: What is your lead time for the radio?

    A: 2-3 days for order prepare after we get payment. Add 5-6 days for Express transportation.

    SEND MESSAGE

    We will contact you within one working day. Please pay attention to your email.