Yaesu FTDX101D transceiver
FT-DX101D yaesu sdr transceiver,yaesu hf transceiver, for sale
Main features
Revolutionary Hybrid SDR Architecture
At the heart of the Yaesu DX101D SDR transceiver lies its innovative hybrid SDR configuration, seamlessly integrating two distinct receiver technologies. The narrowband SDR employs an advanced down-conversion design with a first intermediate frequency of 9MHz and utilizes high-quality components including dual-gate MOSFETs and a quad-channel dual-balanced mixer. This architecture leverages a crystal roof filter to achieve superior multi-signal characteristics, providing a steep filter shape factor for excellent adjacent-channel rejection. An 18-bit A/D converter ensures high-resolution digital signal processing, while direct-sampled SDR provides real-time spectrum display across the entire frequency band.
Unparalleled RF Performance and Signal Purity
The Yaesu DX101D sets a new benchmark for receiver dynamic range and signal purity. Employing a 400MHz HRDDS (High Resolution Direct Digital Synthesizer) local oscillator system, it produces an exceptionally pure local signal with a phase noise characteristic better than -150 dBc/Hz at a 2kHz interval. This translates to superior practical performance: blocking dynamic range exceeding 150dB, reciprocal mixing dynamic range exceeding 123dB, and third-order intermodulation dynamic range exceeding 110dB in the 14MHz band.
Advanced VC-Tune RF Preselector
The third-generation RF VC-TUNE system represents a significant innovation over previous designs. Unlike traditional preselectors that use discrete component switching, this Yaesu high-frequency transceiver employs a high-precision stepper motor-driven variable capacitor, providing continuous frequency coverage and an unprecedented -70dB maximum attenuation. This superior miniaturization eliminates interference from relay switching while allowing the operator to fine-tune the suppression of specific interference signals by rotating the MPVD ring. Band-specific tuning points are automatically stored, continuously and effectively preventing recurring sources of interference.
Superior User Interface and Display
The Yaesu SDR transceiver features a stunning 7-inch TFT color touchscreen with a resolution of 800×480 pixels, clearly displaying key operational information. The innovative 3DSS (Three-Dimensional Spectrum Stream) system surpasses traditional waterfall chart displays, intuitively presenting signal strength along the frequency, amplitude, and time axes for a direct assessment of band status. The active band indicator places the band selection key directly above the VFO knob and uses color LEDs (white for the primary band, blue for the secondary band, and red for the transmit band) to instantly identify the operating status. A multi-function VFO outer ring (MPVD) surrounds the primary tuning knob and features a precision aluminum control ring, allowing for quick adjustment of the VC-TUNE, trimmer, secondary VFO, or custom functions without removing your hands from the operating position. Comprehensive interference management.
Dual receiver independent operation
The primary and secondary receivers operate completely independently from the RF front-end to the Software-Defined Radio (SDR) processing stage. This true dual-receiver architecture enables true frequency division operation, allowing operators to monitor long-range communication (DX) frequencies while transmitting in an offset band, or simultaneously compare the status of different bands. Each receiver benefits from the same high-performance signal path, ensuring consistent performance regardless of the VFO selected.
Future-proof Connectivity and Remote Operation: Yaesu SDR transceivers offer modern operational flexibility and comprehensive PC remote control capabilities. With optional LAN connectivity, operators can manage all transceiver functions, dual-band oscilloscope displays, and filter settings remotely via the internet. This allows users to conveniently operate from a radio room via a home network or achieve true remote radio control, integrating complete audio, RF oscilloscope, and CAT command functionality.
Other functions
- AGC Delay
- AMC Release Time
- Processor Level
- VOX Gain
- VOX Delay
- Anti VOX
- CW Delay Time
- CW Keyer Speed
- CW Pitch
- Microphone
- Desktop microphone
- Remote control system
- Antenna tuner
Specifications
| General | ||
| Tx Frequency Ranges | 1.8MHz band - 50MHz band (Amateur bands only) 70MHz- 70.5MHz (UK Amateur bands only) | |
| Rx Frequency Range | 30kHz- 75MHz (operating) 1.8MHz- 29.699999MHz (Specified performance, Amateur bands only) 50MHz- 53.999999MHz (Specified performance, Amateur bands only) 70MHz- 70.499999MHz (Specified performance, UK Amateur bands only) | |
| Emission Modes | A1A(CW), A3E(AM), J3E(LSB/USB), F3E(FM), F1B(RTTY), G1B (PSK) | |
| Frequency Steps | 1/5/10Hz (SSB, CW), 10/100Hz (AM, FM) | |
| Antenna Impedance | 50Ω, unbalanced (Antenna Tuner OFF) 16.7 -150Ω, unbalanced (Tuner ON, 1.8MHz- 29.7MHz Amateur bands) 25- 100Ω, unbalanced (Tuner ON, 50MHz Amateur band) | |
| Operating Temperature Range | +32°F to +122°F (0℃ to +50°C) | |
| Frequency Stability | ±0.1ppm (after 1 minute @+14°F to +140°F [-10°C to +60°C]) | |
| Supply Voltage | AC100V/200V (FTDX101MP) DC13.8V ±10% (FTDX101D) | |
| Power Consumption (Approx.) | Rx (no signal) 100VA (FTDX101MP), 3.5A (FTDX101D) Rx (signal present) 120VA (FTDX101MP), 4.0A (FTDX101D) Tx 720VA (FTDX101MP: 200W) Tx 23A (FTDX101D: 100W) | |
| Dimensions (WxHxD) | 16.6"×5.1"×12.7"(420 × 130 x 322mm) | |
| Weight (Approx.) | 31.5lbs (14.3kg): FTDX101MP, 26.5lbs (12kg): FTDX101D | |
| Transmitter | ||
| Power Output | FTDX101MP: 200W (CW, LSB, USB, FM, RTTY, PKT), 50W (AM) FTDX101D: 100W (CW, LSB, USB, FM, RTTY, PKT), 25W (AM) | |
| Modulation Types | J3E (SSB): Balanced A3E (AM): Low-Level (Early Stage) F3E (FM): Variable Reactance | |
| Maximum FM Deviation | ±5.0kHz / ±2.5kHz (Narrow) | |
| Harmonic Radiation | Better than -50dB (1.8MHz- 29.7MHz Amateur bands) Better than -66dB (50MHz Amateur band: 200W) Better than -63dB (50MHz Amateur band: 100W) | |
| SSB Carrier Suppression | At least 60dB below peak output | |
| Undesired Sideband Suppression | At least 60dB below peak output | |
| Receiver | ||
| Circuit Type | Double Superheterodyne | |
| Intermediate Frequencies | 1st IF 9.005MHz (MAIN), 8.900MHz (SUB) 2nd IF 24kHz (MAIN/SUB) | |
| Sensitivity (TYP) | SSB/CW (BW: 2.4kHz/10dB S+N/N) 1.8MHz- 30MHz 0.16uV (AMP2"ON") 50MHz- 54MHz 0.125uV (AMP2"ON") 70MHz- 70.5MHz 0.16uV (AMP2"ON") AM (BW: 6kHz/10dB S+N/N, 30% modulation @ 400Hz) 0.5MHz- 1.8MHz 6.3uV 1.8MHz- 30MHz 2uV (AMP2"ON") 50MHz- 54MHz 1uV (AMP2"ON") 70MHz- 70.5MHz 2uV (AMP2"ON") FM (BW: 12kHz, 12dB SINAD) 28MHz- 30MHz 0.25uV (AMP2"ON") 50MHz- 54MHz 0.2uV (AMP2"ON") 70MHz- 70.5MHz 0.25uV (AMP2"ON") | |
| Selectivity (WIDTH: Center) | Mode | -60dB |
| CW (BW=0.5kHz) | 0.75kHz or less | |
| SSB (BW=2.4kHz) | 3.6kHz or less | |
| AM (BW=6kHz) | 15kHz or less | |
| FM (BW=12kHz) | 25kHz or less | |
| IF Rejection | 60dB or better (1.8MHz- 28MHz Amateur bands, VC-tune"ON") 60dB or better (50MHz Amateur bands) | |
| Image Rejection | 70dB or better (1.8MHz- 28MHz Amateur bands) 60dB or better (50MHz- 54MHz Amateur bands) | |
| Maximum Audio Output | 2.5W into 4Ω with 10% THD | |
| Audio Output Impedance | 4 to 16Ω (4Ω: nominal) | |
| Conducted Radiation | Less than 4nW | |
FAQ
Q1: Can your radios be customized with my brand?
A: Of course. Generally, logos, outer packaging, patterns, etc. can be customized. The minimum order quantity is usually 200 pieces.
Q2: Can you offer the sample for me to test the quality first?
A: Yes,we can offer the sample, but sample cost and shipping cost need to pay by yourself, the fee will return to you when place order quality.
Q3: Do you have radio agent certificate?
A: Yes,we are, Icom, Hytera, Baofeng,Vertex these radio authorized agent,all of these certificates we have and can offer to you.
Q4: What is your radios warranty?
A: Radio body:1 year, accessories:6 months
Q5: What is your lead time for the radio?
A: 2-3 days for order prepare after we get payment. Add 5-6 days for Express transportation.
SEND MESSAGE
We will contact you within one working day. Please pay attention to your email.
Comprehensive score